Instructions Of Interior Painting

Inside painting requires as careful preparation of surfaces as does external painting. The introduction of odorless paints now makes it possible to paint any time of the entire year. Formerly, most interior painting in the house was done in the tumble or spring, when it was possible to leave the house windows open to ventilate the room. But open windows brought dirt in to the room to mar the done painted surface.

A good interior paint job is often 50% preparation and 50% painting. Usually do not rush in preparing the floors in your eagerness to access the brush or roller. If you don't prepare the surfaces properly, you will be back with the paint brush or roller in a couple of months.

In this section you will discover the necessary information on the use of different types of paints on various interior wall, ceiling and floor materials.

Plaster

New dry plaster in good condition, which is to be done with a paint other than water paint, ought to be given a coating of primer-sealer and permitted to dry thoroughly before staying inspected for uniformity of appearance. Variations in gloss and color differences regarding tinted primers indicate set up whole surface has been completely sealed. If not, another coat of primer-sealer ought to be applied. If only several "suction spots" are apparent, a second coat over these areas may be sufficient.

A flat, semi-gloss, or high-gloss finish could be applied to the primed surface. For a set finish, two coats of toned wall color should follow the priming coating. For a semi-gloss end, one coat of flat walls paint and something coat of semi-gloss paint should be applied to the primed surface area. For a high-gloss finish, one coat of semi-gloss color and one coat of high-gloss enamel should be used over the priming coat.

Before applying normal water paints of the calcimine variety to new plastered walls they should be sized, using the glue-water dimension or, if the plaster will be dry, a skinny varnish or primer-sealer.

Cool water paints of the casein kind may be applied either right to a plastered surface, or the surface could be first given a layer of primer-sealer to equalize uneven suction results. The same is true of resin-emulsion paints, with the recommendations of the manufacturer of the product being given preference in case of doubt. Since resin-emulsion paints normally contain some oil in the binder, they should ordinarily be applied only to plaster which has dried thoroughly.

Texture wall paints may also be used on plaster surfaces. The benefits of this kind of paint are that one layer economically generates a textured decoration and relieves the monotony of smooth flat paint. It also addresses cracks or patches in the plaster more completely than ordinary wall paint. The negatives of texture wall color are they Collect dust and are difficult to restore to a smooth surface finish. These materials are available as water-or oil-based paints, happen to be thicker than ordinary wall paints, and may be applied to wallboard together with plaster to create textured effects such as random, Spanish, mission, and multicolored.

Composition Wallboard

Composition wallboard normally presents no particular painting difficulties if the normal precautions are observed, such as making certain that the top is dry and free from grease and essential oil. The painting process of wallboard is equivalent to for plaster; it needs a priming and sealing coating accompanied by whatever finishes coats are wanted, or may be given one-coat smooth or resin-emulsion type paint.

Wallpaper

Water-thinned paint may be applied to wallpaper that's well- bonded to the wall and will not contain dyes which may bleed into the paint. Franklin Painters One thickness of wallpaper can be preferable for paint application. Paints other than those of the water-thinned type can also be applied to wallpaper by following a instructions given for painting plaster. Even so, wallpaper coated with this type of paint is difficult to eliminate without problems for the plaster.

Wood Walls and Trim

New interior walls and hardwood trim ought to be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface could be rubbed with linseed essential oil, varnished or shellacked, and waxed. If an opaque surface finish is desired, semi-gloss color thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer formerly described for walls may be used as a priming layer on wood. A couple of coats of semi-gloss color should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.

Masonry Walls and Ceilings

Interior masonry walls and ceilings above quality may, in general, be painted in quite similar manner as plaster surfaces. In this article again, it is necessary to permit adequate moment for the masonry to dry before applying paint and, furthermore, attention should be directed at the preparation of the top. When decorating a wall containing Portland cement (concrete, for example), it is essential to take precautions contrary to the attack of alkali. For this function, alkali-resistant primers such as for example rubber-base paints can be utilized when oil paints are to check out.

Cement-water paints are best suited for application to basement walls which are damp as a result of leakage or condensation. To use these paints, exactly the same procedure ought to be followed as is described right here for painting exterior masonry wall space.