How Repair Double Glazed Windows Became The Hottest Trend Of 2023

How to Repair Double Glazed Windows

There are several tell-tale signs that your double glazed windows require repairs. Water ingress and draughts are clear signs of damage to the frames of your windows. They must be fixed as quickly as possible.

Misting can also indicate that your window seals are in need of replacement. Replacing the seals will solve the issue and will stop condensation, draughts, or leaks.

Broken Panes

One of the most common problems that a double-glazed window faces is broken glass. While double pane windows are more difficult to break than single-pane ones However, accidents do occur and you'll need to repair a broken window as quickly as possible.

The first step is to get rid of any glass fragments that are loose that are still in the frame. Wear gloves and eye protection when removing the glass, because it is extremely sharp. Check the floor for any loose pieces once the shards are gone. It's also a good idea for you to pull out any hooks that hold the panes together.





After the glass has been removed, you can begin the process of removing the old glass compound and glazing points (small fasteners that fix the glass into the window frame) and replacing them with new ones. This can be a lengthy procedure, and you'll need a few tools to complete the task. This includes latex glazing putty; metal glazing points, pliers, a heat gun, and a putty knife.

When removing the old glaze compound and points it is a good idea to start at the top of the sash, and begin to work your way down. This will ensure that you don't end up getting any of the sash's paint or wood stuck to the tool. Also, if you end up removing some of the sash's wooden pieces, be sure to employ a chisel or a utility knife instead of a chemical stripper because this could cause damage.

After you're done you can sand the wood. Once it is smooth, you can apply the oil of linseed or a clear wood sealer to protect it from future water damage.

There are a few simple fixes to fix a cracked double pane window. But these fixes are not a solution to repair the damage and should only serve as a temporary solution. The use of silicone caulk can aid in sealing the gap. However it is essential to use a high-quality caulk and the correct application techniques.

Condensation

If you notice a haze of moisture or mist between the panes of glass that you have double glazing, this means that your window seal has failed. This could be a significant issue as it stops the gas or air that acts as an insulation from being trapped between two panes.

A double glazing expert can easily fix this issue. To resolve the issue your window company will remove the affected window sash as well as the IGU (insulating glass unit) before putting into a new gasket to make a strong and airtight seal to stop condensation from happening again. They'll also use a special drying agent to help dry out the area and stop the condensation from happening again.

The other reason why you might notice a misty appearance between the glass panes of windows that are double-glazed is that the frame has moved over time, which breaks the crucial seal. This could be a problem as it means that your windows won't function properly and will lose energy efficiency.

It is possible to replace a double-glazed window's panes but this can be expensive and is usually only necessary if the window is beyond repair. If you're experiencing problems with your double-glazed windows and are still within the warranty period, you may be able to repair it for free or at a reduced price.

Check your warranty terms before making contact with the company to determine whether they can fix the issue without replacing the entire window. Double-glazed windows typically have an assurance of 10 to 20 years. You might find that the company is able to repair the window instead of replacing it. If this is the case you're in, they'll send out a specialist to fix your double-glazed windows. They can usually complete the task quickly. This is a cheaper alternative to buying and installing brand new double-glazed windows, and it's better for the environment too!

Broken Locks & Handles

If your window handle is broken or hard to open, it can be a huge issue as it prevents you from using your windows. It also gives burglars a chance to break into your home. There are several ways to fix this but the most effective solution is to speak with a uPVC professional. They will be able to fix the issue for you, or at least give you a replacement handle.

There are many kinds of window locks however, the most well-known is the Maco or Mila locks that are found on most uPVC frames. These locks use bayonet style rods to lock, and they are very easy to seize up. If this occurs, the handle's nose will be stuck in the popped out position, and will not go back into the wedged locked position. This can be a frustrating issue, but it can be resolved with a few easy steps.

To fix the issue, you'll have to remove the handle. This should be simple enough using a screwdriver. Once the handle has been removed, you should then be able to see the screws holding the lock to the frame. Once the screws have been removed you can then employ pliers or a wrench to try to grab the bolts for the shoot. If this fails it is possible to insert the tool through the gap between the frame and window (the gap could differ on the opposite side of the window) and then make an "u" shape with your hand to try and grab the shoot bolts.

You can shut your window by moving the handle to a closed position if capable of removing the bolts for shooting. The gearbox (espag or espagnolette.) is likely to be damaged and won't open with the handle. It is possible to repair the gearbox without the shoot bolts which means that the window can be opened with the handle (and will still be secure) however, you'll require a new handle and gearbox.

Broken Hinges

If your uPVC window hinges are no longer operating smoothly, you may need to replace or repair them. It could be because the window was opened too forcefully or the hinge snapped. They could also have a problem. Fortunately it is quick and easy and there's no need to purchase windows that are new instead, you can get your old ones fixed instead.

First, you'll need remove the hinges currently installed. To do this, remove the screws that hold the frame to the hinges. Once you've removed the hinges you can replace them with plywood boards cut to the right dimensions. The plywood should be thicker than the original one to be able to withstand the weight when the window is opened and closed. You'll also want to use a wood filler to ensure that the hole created by the hinge is filled completely and won't leak or become loose in the future.

After you've re-installed hinges and filled the holes, you'll need to paint them. Be sure to use a high-quality paint to ensure it will last as long as it can. Once the paint has dried, you can reconnect the window. Secure any screws that are loose.

Regular maintenance is essential for hinges on windows. You can help them last longer by cleaning them regularly on the track of friction and lubricating the hinge mechanism. You can also apply a wood preservative to shield them from the elements, which can help to prevent rust and maintain their appearance for as long as is possible.

repairmywindowsanddoors.co.uk -glazed windows are more energy-efficient than single-glazed ones, and can help you save money on heating. However, just like every other part of your home, your windows can suffer from wear and tear and might require repair or replacement as time passes. If you're seeing any of the signs that your double glazed windows aren't working properly it's worth having them checked by our experts in Preston.